Urander Pano Tent User Guide

1. Remove the protective frame using a 5mm Allen key

2. Open the back side of the tent (the side with the blue Urander logo on top of the shell) by pushing the two locks on each side toward the center, lifting the corner handles to unfold it into a V shape, and removing all hardware and the ladder from inside.

3. After removing all the ladder and hardware, close the tent from the top, then lift it onto the rack. Insert the silver plate into the track beneath the tent. Position the tent over the two crossbars you will use, providing a total of four mounting points. Use a pair of silver plates with bolts on each crossbar, adding the longer silver plate beneath the crossbar, and secure everything with the locking nuts for a more secure installation (do not use the black plastic twist knobs).

4. Open

5. Close